 | 't h e p o w e r t r a n s m i s s i o n e n g i n e e r s' | |||||
| HOME | ABOUT US | MULCO | SEARCH | UK DISTRIBUTORS | ||
| 't h e p o w e r t r a n s m i s s i o n e n g i n e e r s' | |||||
| HOME | ABOUT US | MULCO | SEARCH | UK DISTRIBUTORS | ||
BRECOFLEX® POWER | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
| • Slipless, synchronous operation • Constant length, no post elongation (stretch) • 'S+Z' twist tension members • Reduced noise • Extremely wear resistant • Efficiencies up to 98% • Maintenance free • Belt speeds up to 80 m/sec • Temp. range -10ºC to +80ºC, temporarily +120ºC • Chemically resistant to ozone and sunlight • Conditionally resistant to acids and alkalis • Resistant to fats and petrol • Extremely oil resistant • Hydrolysis resistant • High power with low initial tension • High positional and angular accuracy | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Brecoflex belts are longitudinally extruded with a pair of continuous helical tension members in 'S+Z' twist to reduce belt run-off and heavy side loads on flanges. Available in pitch length multiples from a minimum length to any desired length up to 25 metres. There are NO mould charges for a new length of belt. Brecoflex belts are a combination of an abrasion resistant, high power PU body and teeth extruded around and locked to high tensile, corrosion resistant, steel tension members. |  | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Brecoflex StandardPlus The new Brecoflex StandardPlus versions combine a higher tooth-pitch accuracy with unique bifilar, S & Z wound, steel tensioning system which greatly reduces belt run-off. The net result is a competitively priced, endless timing belt system that can be applied to positioning applications previously thought to be the domain of standard grade rolled ball-screw technology. In testing a positioning precision of +/- 0.03 to +/- 0.05 mm per metre of travel was achieved. When testing against existing "real life" applications an accuracy improvement of at least two and a half times better and as much as a seven fold improvement was attained. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
