 | 't h e p o w e r t r a n s m i s s i o n e n g i n e e r s' | |||||
| HOME | ABOUT US | MULCO | SEARCH | UK DISTRIBUTORS | ||
| 't h e p o w e r t r a n s m i s s i o n e n g i n e e r s' | |||||
| HOME | ABOUT US | MULCO | SEARCH | UK DISTRIBUTORS | ||
Combitex BackingsCombitex belts can be manufactured from most permutations of backing materials to give multi-layered belts with the desired resilience / abrasion resistance / coefficient of friction properties. |
MATERIAL | PROPERTIES |
| NKR-38 | abrasion resistance, high coefficient of friction |
| FoodX-40 | food quality, good heat aging resistance |
| AbbrX-55 | resistant to severe abrasion, high resilience and elasticity |
| NitriSol-55 | heat, wear, abrasion and aromatic carbon resistant |
| UraCell VHD | high wear resistance, oil, fat and chemical resistant |
MATERIAL | PROPERTIES | RCI* |
| NeoCell | good oil and chemical resistance, closed cell material | |
| NeoCell-Plus | good oil and chemical resistance, closed cell material | |
| UraCell-LD | partially closed cell, good oil and chemical resistance | |
| UraCell-MD | partially closed cell, good oil and chemical resistance | |
| UraCell-HD | mainly closed cell, good oil and chemical resistance |
| RCI*= Relative Compressibility Index Some of the above combinations may require cross slitting or knife cutting for flexibility (please consult our technical department). |
Combitex belts are used where the designer needs a combination of backing properties not available from a single backing material. A typical example would be high compressibility combined with a high coefficient of friction. UraCell-LD is highly compressible but does not have a particularly high coefficient of friction and NKR is not particularly compressible but does have a high coefficient of friction. The solution to this problem is to combine two backing materials with the appropriate characteristics to give the required properties.